Introduction
We built this halogen UV lamp for one reason: to give you serious power in a seriously compact package. You know that feeling when you need raw output for heating or curing, but you don’t have space to waste? This unit solves that. It puts the power exactly where you need it, wires up without a headache, and is tough enough to hold up on a busy production line.
What’s Under the Hood
Let’s get into the details, because they matter. This thing runs on 400V, puts out 2500W, and the active tube is 300mm long. That combo gives you a ton of power packed into a small footprint. Perfect when you’re heating a tiny zone or keeping up with a fast line. And here’s a nice touch: the 400V rating means you get lower current for that wattage. So you can run heavier loads without having to oversize your cables and contacts. Less hassle, more peace of mind.
The Build
The tube itself is quartz. We went with it because it handles intense heat and lets the UV through without softening up. The halogen fill keeps the filament stable, so you get consistent output for the long haul. The base is an R7s, a two-pin ceramic design that’s proven itself over and over. It snaps in fast and stays aligned, even when things get shaky. And the best part? It’s a straight drop-in replacement for most standard fixtures. You can swap it out without wrestling with the bracket or terminal block.
Where It Shines
This lamp is your go-to when you need concentrated UV and infrared energy. Think curing adhesives, drying coatings, or preheating PET blowing zones. That 2500W density delivers a rapid temperature rise, but it also means things get hot around it. So plan your cooling and shielding accordingly. Just run it within its rated voltage and orientation, and you’ll get repeatable heat with almost no drift between cycles. It just works.